Six-lane river bridge approach
42 boreholes to 45 m through alluvium into weathered khondalite, MASW along the alignment, and pile capacity advice for 1.2 m bored piles.
Cuttack, Odisha/2025/45 m max depth
We read the ground before you build on it.
Geotechnical investigation, soil testing and foundation advice for infrastructure across eastern India.
0.0
4.0
8.0
12.0
16.0
20.0
Filled up soil0.0–1.4 m · N = 4
Silty clay1.4–5.2 m · N = 11Firm, brown, medium plasticity
Laterite5.2–11.6 m · N = 32Dense, reddish brown, nodular
Weathered khondalite11.6–17.5 m · N > 50RQD 38%, core recovery 74%
Hard rock17.5–22.0 m · refusalRQD 81%, UCS 46 MPa
- Laboratory
- NABL scope
- Rigs
- 11, all owned
- Report draft
- 10 working days
- Mobilisation
- within a week
- Boreholes drilled
- 1,200+
- onshore, since 2014
- Test methods
- 310
- field + laboratory
- States covered
- 9
- eastern & central India
- Engineers & technicians
- 48
- on rolls
Field crews, a laboratory, and someone who signs the recommendation
Ten service lines that carry a project from the first trial pit to the last monitoring reading.
10 service lines · field, laboratory, specialist
- 0 – 60 mGeotechnical InvestigationRotary and percussion boreholes, SPT, undisturbed sampling and rock coring, logged strata by strata.IS 1892IS 2131IS 4453
- sample scaleSoil Laboratory TestingIndex, classification, shear strength and consolidation testing in a temperature-controlled NABL lab.IS 2720 (all parts)IS 1498ASTM D2487
- sample scaleRock & Aggregate TestingStrength, abrasion and durability testing on rock cores, coarse aggregate, sand and building stone.IS 383IS 2386IS 9143
- up to 1,000 tPile & Plate Load TestingVertical, lateral and pull-out pile testing with kentledge or anchor reaction, plus plate load tests.IS 2911 (Part 4)IS 1888ASTM D1143
- 0 – 40 mPile Integrity & NDTLow-strain integrity testing, crosshole sonic logging and concrete assessment on existing structures.IS 14893IS 13311ASTM D5882
- 0 – 100 mGeophysical SurveyNon-intrusive imaging of bedrock, cavities and groundwater across large or access-restricted sites.IS 1893 (Part 1)ASTM D5777ASTM D4428
Five stages, each with a date attached
You always know which stage your job is in, and who on our side is holding it.
- Stage 1
Enquire
Send the site plan and the structure you intend to build. We reply with a scope, a borehole layout and a fixed price within two working days.
- Stage 2
Mobilise
Rig, crew and supervising engineer reach site. Positions are marked with DGPS and agreed with your representative before drilling starts.
- Stage 3
Investigate
Drilling, sampling and in-situ testing proceed under continuous supervision. Field logs are shared daily so you are never waiting in the dark.
- Stage 4
Test
Sealed samples reach the lab within 48 hours and are tested on calibrated equipment under NABL scope.
- Stage 5
Report
Factual and interpretative reports, with design parameters your structural consultant can use directly. Draft in 10 days, final after your comments.
Ground we have already been through
Steel plant raw material yard
Investigation across 60 acres, 1,000 t kentledge pile load test, and settlement monitoring of stockpile foundations.
Jajpur, Odisha/2025/1,000 t test load
Port berth and back-up area
Near-shore boreholes from a jack-up platform, cyclic triaxial testing, and liquefaction assessment for the berth structure.
Paradip, Odisha/2024/18 marine boreholes
400 kV transmission line
Tower-wise investigation across 210 km, soil resistivity for earthing design, and foundation type recommendation per tower.
Odisha – Chhattisgarh/2024/210 km corridor
Calibrated equipment, named technicians, retained samples
Our Bhubaneswar laboratory works to a NABL scope covering soil, rock, aggregate, concrete and water. Every certificate carries the method, the equipment ID and the technician who ran it. Samples are held for sixty days after reporting, so a result can always be re-checked.
- 310
- test methods under scope
- 48 h
- sample to lab, from site
- 0.01 mm
- settlement resolution
- 60 days
- sample retention
Send the site plan. Get a scope and a price in two days.
Tell us what you intend to build and where. We propose a borehole layout, a test schedule and a fixed cost. No obligation.